Product Description
Product Description
The reducer is usually utilised for reduced-pace and high-torque transmission gear. The motor, interior combustion motor or other substantial-speed working electrical power is used to obtain the objective of deceleration by meshing with the large gear on the output shaft by way of a gear with a tiny variety of teeth on the enter shaft of the reducer. The reducer will also have several pairs of gears with the very same theory to attain the best reduction impact. The ratio of the variety of enamel of the big and small gears is the transmission ratio.
| SPECIFICATIONS | Phase | RATIO | RATED TORQUE (N.m) | ||
| SPLE60-60mm Spherical Flange Planetry Gearbox | L1 | 4 | 25 | ||
| 5 | 28 | ||||
| 7 | 20 | ||||
| ten | 10 | ||||
| L2 | 16 | 30 | |||
| 20 | 30 | ||||
| 25 | 32 | ||||
| 28 | 30 | ||||
| 35 | 30 | ||||
| 40 | 25 | ||||
| fifty | 25 | ||||
| 70 | 20 | ||||
| Adapted motor | ∅ 8-fourteen/ ∅38.1-2/∅F47.14-M4 | ||||
| Rated Input Speed (rpm) | 1000/min | ||||
| Max Input Velocity (rpm) | 2000/min | ||||
| Backlash | L1 | ≤10 Arcmin | |||
| L2 | ≤15 Arcmin | ||||
| Fault end torque(N.m) | 2 occasions of rated torque | ||||
| Efficiency | L1 | 94% | |||
| L2 | 92% | ||||
| Average life span | 20000h | ||||
| Operating temperature | -10°~+90° | ||||
| Nosie | ≤60 db | ||||
| Weight (kg) | L1 | 0.seventy five | |||
| L2 | 1 | ||||
| IP | 54 | ||||
| Installation approach | Any set up approach | ||||
Creation Range
42 Collection Planetary Gearbox
Backlash: 10-fifteen arcmin
Ratio Variety:
L1: 4,5,7,10,
L2: 12,16,twenty,25,28,35,40,50,70
Body Dimension: 42mm Input Flange
Equipment Arrangement: Planetary Straight Teeth
sixty Collection Planetary Gearbox
Backlash: 10-fifteen arcmin
Ratio Assortment:
L1: 4,5,7,10,
L2: 16,20,twenty five,28,35,forty,50,70
Body Dimension: 60mm Enter Flange
Gear Arrangement: Planetary Straight Tooth
90 Series Planetary Gearbox
Backlash: ten-fifteen arcmin
Ratio Assortment:
L1: 4,5,7,ten,
L2: 16,twenty,twenty five,28,35,40,50,70
Frame Dimension: 90mm Enter Flange
Equipment Arrangement: Planetary Straight Teeth
Powder Metal Series Planetary Gearbox
Backlash: ten-15 arcmin
Ratio Selection:
L1: 4,5,7,10,
L2: sixteen,twenty,25,28,35,40,50,70
Body Dimension: 42mm & 57mm
Gear Arrangement: Planetary Straight Enamel
Right Angle Collection Planetary Gearbox
Backlash: ten-fifteen arcmin
Ratio Choice:
L1: 4,5,7,10,
L2: 16,twenty,25,28,35,forty,fifty,70
Body Dimension: 60mm & 90mm
Gear Arrangement: Planetary Straight Tooth
Software Area
Automated Arms
Assembly Line
3D-Printer
Health-related -Products
CNC Equipment
Tapping Device
Other Automation Units
Why Decide on Us
ZheJiang High Precision Gear Transmission Co., Ltd
WORKSHOP
ZheJiang High Precision Equipment Transmission Co., Ltd located in HangZhou metropolis, ZheJiang Province, China. It is a major company devoted in precision transmission components and program research, manufacture and sales, various series of items are made in its 5000 sq. CZPT workshop, the precision planetary gearbox and equipment motor are designed particularly for solar strength market and have served numerous huge-scale solar assignments worldwidely.
The investigation group has a lot more than 15 many years ordeals in this field, who can make certain a punctual and successful support to meet customer’s certain demands. It has pasted the ISO9001 high quality management technique and CE, merchandise have been exported to tons of countries with a extensive selection software in AGV, intelligent robot, logistic, industrial automation, solar energy, vessel, packaging and textile and so on.Persistently, our aim is to market the software of photo voltaic electricity market in the entire world, and we think it gives clear and sustainable energy for humanity to much better safeguard our surroundings.
Team
HPS attends 5-6 exhibitions each and every year, both solar PV exhibitions and automation industry exhibitions, expert revenue crew and good quality merchandise develop CZPT a great track record in the market place.
CERTIFICATIONS
Delivery
FAQ
Q1:Which regions are your goods largely employed in?
A:At present, we have 2 major items: precision planetary gear reducer and photo voltaic geared motor. Most of the precision planetary reducers are utilized in automation fields, this sort of as healthcare gear, 3D printers, doorway openers, tapping devices, CNC lathes and a series of automation gear. In addition, our photo voltaic geared motors are used in photovoltaic power technology initiatives, which are mainly mixed with rotary drives to generate solar panels to track sunlight.
Q2: How to pick the suited planetary gearbox?
A :First of all, we need you to be able to offer related parameters. If you have a motor drawing, it will permit us advocate a suited gearbox for you more quickly. If not, we hope you can supply the subsequent motor parameters: output velocity, output torque, voltage, existing, IP, sound, working situations, motor dimensions and power, and so forth.
Q3: What is the value ?
A : The major identifying element for the value of each product is the get quantity. You can communicate with us and allow us realize each and every other. I imagine that our charges, item good quality and our companies can undoubtedly make you pleased.
This autumn: Do you provide tailored provider?
A: Of course, we give tailored providers. You only require to put CZPT your wants, and we will do our ideal to give you with a prepare, make programs, and attempt our best to satisfy your needs.
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Samples: |
US$ 66/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Planetary Gearbox Basics
If you’re in the market for a new Planetary Gearbox, you’ve come to the right place. There’s more to these mechanical wonders than just their name. Learn about Spur gears, helical gears, and various sizes. After you’ve read this article, you’ll know exactly what to look for when shopping for a new one. And you’ll also be able to avoid common mistakes made by amateur mechanics.
Wheel drive planetary gearboxes
Planetary gearboxes have numerous benefits over conventional gearboxes. Their compact design is advantageous for servo functions. Their lubrication is a key feature to maintain smooth operation and avoid damage to the gears. Some manufactures use CZPT to ensure proper functioning. These gearboxes have nearly three times the torque of traditional gearboxes while remaining compact and low in mass.
The planetary gears are made of three different types. Each type has an input and output shaft. The input and output shafts are usually coaxially arranged. The input and output shafts are connected to each other via a carrier. The carrier rotates with the planetary gears. The sun gear is the input gear and is typically 24 teeth in diameter. The outer gears are connected to the sun gear via rings of gears that are mounted around the sun gear.
Planetary gearboxes are also used in wheeled and tracked vehicles. They are also used in winch systems, which lift and lower loads. Typical applications include heavy machinery, such as cranes and earthmovers. Wheel drives are also widely used in municipal and agricultural vehicles, as well as material handling vehicles. The wheel drive is typically mounted directly into the wheel rim. A wheel drive may be fitted into two, three, or even four wheels.
A planetary gear set may be used in stages to provide different transmission rates. In order to choose the right gearbox for your application, consider the torque, backlash, and ratio you need. Then, consider the environment where the gearbox is used. Depending on its location, it might need to be protected from weather, water, and other elements. You can find a wide range of different sizes in the market.
Spur gears
There are two basic types of gearheads: planetary and spur gearheads. Each has its advantages and disadvantages depending on the application. This article will discuss the differences between these two types of gearheads. Spur gearheads are commonly used for transmission applications, while planetary gearheads are more widely used for motors. Spur gearheads are less expensive to produce than planetary gearheads, and they are more flexible in design.
There are many different types of spur gears. Among them, a 5:1 spur gear drive ratio means that the sun gear must rotate five times per revolution of the output carrier. The desired number of teeth is 24. In metric systems, the spur gears are referred to as mm and the moon gears as modules. Spur gears are used in many different types of applications, including automotive and agricultural machinery.
A planetary geartrain is a combination of ring and spur gears, which mesh with each other. There are two kinds of planetary geartrains: simple planetary gears and compound planetary gears. Spur gears are the most common type, with a sun gear and ring gear on either side of the sun. Simple planetary gears feature a single sun and ring gear, while compound planetary gears use multiple planets.
A planetary gearbox consists of two or more outer gears, which are arranged to rotate around the sun. The outer ring gear meshes with all of the planets in our solar system, while the sun gear rotates around the ring gear. Because of this, planetary gearboxes are very efficient even at low speeds. Their compact design makes them a desirable choice for space-constrained applications.
Helical gears
A planetary helical gearbox has two stages, each with its own input speed. In the study of planetary helical gear dynamics, the base circle radius and full-depth involute teeth are added to the ratio of each gear. The tangential position of the planets affects the dynamic amplifications and tooth forces. The tangential position error is an important factor in understanding the dynamic behaviour of helical planetary gears.
A helical gearbox has teeth oriented at an angle to the shaft, making them a better choice than spur gears. Helical gears also operate smoothly and quietly, while spur gears generate a thrust load during operation. Helical gears are also used in enclosed gear drives. They are the most common type of planetary gearbox. However, they can be expensive to produce. Whether you choose to use a helical or spur gearbox depends on the type of gearbox you need.
When choosing a planetary gear, it is important to understand the helix angle of the gear. The helix angle affects the way the planetary gears mesh, but does not change the fundamentals of planetary phasing. In each mesh, axial forces are introduced, which can either cancel or reinforce. The same applies to torques. So, if the ring gear is positioned at an angle of zero, helical gears will increase the axial forces.
The number of teeth on the planets is a variable parameter that must be considered in the design phase. Regardless of how many teeth are present, each planet must have a certain amount of tooth spacing to mesh properly with the ring or sun. The tip diameter is usually unknown in the conceptual design stage, but the pitch diameter may be used as an initial approximation. Asymmetrical helical gears may also cause undesirable noise.
Various sizes
There are several sizes and types of planetary gearboxes. The planetary gear sets feature the sun gear, the central gear, which is usually the input shaft, and the planet gears, which are the outer gears. A carrier connects the planet gears to the output shaft. The primary and secondary features of the planetary gearbox are important factors to consider. Besides these, there are other things to consider, such as the price, delivery time, and availability around the world. Some constructors are quicker than others in responding to inquiries. While others may be able to deliver every planetary gearbox out of stock, they will cost you more money.
The load share behavior of a planetary gearbox is comparable to that of a spur or a helical gearbox. Under low loads, individual gear meshes are slightly loaded, while other components have minimal deflections. In general, load sharing behaviour is affected mostly by assembly and manufacturing deviations. In this case, the elastic deflections help balance these effects. The load-sharing behavior of a planetary gearbox improves when the load increases.
Planetary gearboxes come in different sizes. The most common size is one with two or three planets. The size and type of the gears determine the transmission rate. Planetary gear sets come in stages. This gives you multiple transmission rate choices. Some companies offer small planetary gearboxes, while others offer larger ones. For those with special applications, make sure you check the torque, backlash, and ratio.
Whether the power is large or small, the planetary gearbox should be matched to the size of the drive. Some manufacturers also offer right-angle models. These designs incorporate other gear sets, such as a worm gear stage. Right-angle designs are ideal for situations where you need to vary the output torque. When determining the size of planetary gearboxes, make sure the drive shafts are lined up.
Applications
This report is designed to provide key information on the Global Applications of Planetary Gearbox Market, including the market size and forecast, competitive landscape, and market dynamics. The report also provides market estimates for the company segment and type segments, as well as end users. This report will also cover regional and country-level analysis, market share estimates, and mergers & acquisitions activity. The Global Applications of Planetary Gearbox Market report includes a detailed analysis of the key players in the market.
The most common application of a planetary gearbox is in the automobile industry, where it is used to distribute power between two wheels in a vehicle’s drive axle. In a four-wheel-drive car, this system is augmented by a centre differential. In hybrid electric vehicles, a summation gearbox combines the combustion engine with an electric motor, creating a hybrid vehicle that uses one single transmission system.
In the Global Industrial Planetary Gearbox Market, customer-specific planetary gears are commonly used for automated guided vehicles, intra-logistics, and agricultural technology. These gears allow for compact designs, even in tight spaces. A three-stage planetary gear can reach 300 Nm and support radial loads of 12 kN. For receiver systems, positioning accuracy is critical. A two-stage planetary gearbox was developed by CZPT. Its internal gear tension reduces torsional backlash, and manual controls are often used for high-quality signals.
The number of planetary gears is not fixed, but in industrial applications, the number of planetary gears is at least three. The more planetary gears a gearbox contains, the more torque it can transmit. Moreover, the multiple planetary gears mesh simultaneously during operation, which results in high efficiency and transmittable torque. There are many other advantages of a planetary gearbox, including reduced maintenance and high speed.
editor by CX 2023-04-10